Builder and owner reviewing plans inside a framed house

How to Vet a Custom Builder in Texas (When the State Doesn't License Them)

October 28, 2026

By Kyle Ritter | Anders Pierce Realty

Here's something that surprises almost everyone in my custom home class: Texas does not have a state license for home builders. There used to be a state agency that registered builders, the Texas Residential Construction Commission, but the Legislature let it expire in 2009. Since then, nobody at the state level checks whether the person building your house has the training, the money, or the track record to do it.

That doesn't mean Hill Country builders aren't good. We have a lot of excellent ones, and I work with several of them. It means the vetting is on you. You are the licensing board. So let's talk about what to actually check.

What IS licensed (and how to look it up)

The builder isn't licensed, but some of the trades working under them are. Electricians and air conditioning contractors are licensed through the Texas Department of Licensing and Regulation (TDLR), and plumbers through the Texas State Board of Plumbing Examiners. Both have free online license lookups.

Ask a builder candidate who their electrical, plumbing, and HVAC subs are, then spend ten minutes looking them up. A builder who runs established, licensed trades will hand you those names without blinking.

The 6 things I'd check on any builder

1. Insurance, on paper

Ask for a certificate of insurance showing general liability, and ask whether they carry workers' compensation or how their subs are covered. Then ask who carries builder's risk insurance during construction (the policy that covers the house itself against fire, theft, and storm damage while it's going up). Sometimes the builder carries it, sometimes your construction lender requires you to. Either way, you want it written down, not assumed.

2. The warranty, in writing

There's no state-mandated builder warranty in Texas anymore, so what you get is whatever the contract says. Many builders offer a structure along the lines of one year on workmanship, two years on systems, and ten years on major structural items, sometimes backed by a third-party warranty company. Some offer less, some more. Read the actual warranty document, not the brochure version, and ask how a warranty request gets submitted and how fast they typically respond.

3. References you choose, not just the ones they hand you

Every builder has three happy clients ready to call you. That's fine, call them. But also ask for a list of every home they finished in the last two or three years, pick a couple yourself, and ask to see them. Questions worth asking past clients:

  • Did the final price land close to the contract price? If not, why?
  • How did they handle it when something went wrong?
  • How often did you hear from them during the build?
  • Have warranty calls been handled since move-in?

4. Lien history and how they pay subs

In Texas, a subcontractor or supplier who doesn't get paid can file a lien on your property, even if you paid the builder in full. Search the builder's company name in the county clerk's official public records (Comal and Guadalupe records are both searchable online) and see whether lien filings tied to their past jobs show up, and whether they were released. Then ask how they handle lien releases with each draw.

Texas law also gives you some tools here. On a residential construction contract, the builder is required to give you a written disclosure statement before you sign, and at final payment they have to give you a sworn bills-paid affidavit stating the subs and suppliers have been paid. The disclosure also explains the 10% retainage you (usually through your lender) are expected to hold until 30 days after completion. If a builder seems unfamiliar with any of that, take note.

5. Contract type: cost-plus or fixed price

This one matters more than most people realize, and neither type is "better." They just put risk in different places.

Fixed price (stipulated sum)Cost-plus
How it worksOne contract price for the defined scope. Changes go through change orders.You pay actual costs plus the builder's fee (a percentage or a set fee).
Who carries cost riskMostly the builder, for what's in the scopeMostly you
What you need to seeA detailed spec sheet and allowance scheduleReal invoices, an estimate, and ideally a cap or guaranteed maximum
Watch forLow allowances that make the bid look cheaperA loose estimate with no reporting on actual vs. budget

Whichever type you sign, ask how they price change orders and what markup applies to them. That answer tells you a lot about the next twelve months.

6. How they handle allowances

Allowances are placeholder budgets for things you haven't picked yet, like lighting, tile, and appliances. A bid with thin allowances can look tens of thousands cheaper than a competitor's and end up costing more. Ask each builder for their allowance schedule and compare those line by line, not just the bottom line. I go deep on this in Allowances and Change Orders: The Silent Budget Killer.

A few more things worth a look

  • A sample schedule and a sample draw schedule. Builders with real systems have these ready.
  • The Chapter 27 notice. Texas residential construction contracts are supposed to include a bold notice that the contract is subject to the Residential Construction Liability Act, which sets a process (written notice and a chance to inspect and repair) before a homeowner can sue over a defect. Know it's there and what it means.
  • Experience on lots like yours. A builder who mostly builds on flat lots in town may price a sloped, rocky Hill Country lot very differently than one who does it every week. If your lot has slope or rock, ask for a home they've built on a similar site. (More on that in my site work post.)
  • Who you'll actually talk to. The owner you meet in the sales conversation may not be your day-to-day contact. Ask to meet the project manager.

Here's the honest part

The cheapest bid is rarely the cheapest house. Bids that look far apart usually aren't comparing the same thing. One includes the driveway, the other doesn't. One has a $6,000 lighting allowance, the other $15,000. Before you pick a builder, line the bids up apples to apples. That exercise alone has saved my clients more money than any negotiation.

And I'll say this plainly: I don't run anybody down. Different builders fit different projects, budgets, and personalities. The goal is to find the right fit for your lot, plan, and way of working.

Your builder interview checklist

  1. Certificate of insurance (general liability) and who carries builder's risk
  2. Written warranty document and the claim process
  3. List of homes completed in the last 2 to 3 years
  4. Names of electrical, plumbing, and HVAC subs (then look them up)
  5. County clerk records search on the builder's company name
  6. Sample contract: cost-plus or fixed price, change order markup, Chapter 27 notice
  7. Allowance schedule, line by line
  8. Sample schedule and draw schedule

If you want help comparing builder bids side by side, or you want to know which builders fit the kind of lot you're looking at, that's exactly what I do. Come to my free custom home building class and bring your questions. We walk through builder selection start to finish.

Kyle Ritter | Anders Pierce Realty | 830-998-4412 | [email protected]

This article is for educational purposes only and isn't legal advice. Contract terms, lien rules, and warranties vary. Have a Texas real estate or construction attorney review any building contract before you sign.

Back to Blog